LT-AD01 2D Phased Array Radar + LT-UJ830D Directional UAV Jammer (Optional)
Product Introduction:
The air defense radar produced by our company has a
three-coordinate all solid-state fully coherent and active
two-dimensional phase scanning system. The working frequencyband is
the X-band, and the whole device adopts a modular, all solid-state
design to ensurethe reliability of the equipment. The equipment is
used for high-speed target detection tracking, and positioning.in
addition to meeting the rigidity and strength indicators, the
design also takes into account the layout, installation, wiring,
cooling and other requirementsof a large number of electronic
devices.
The drone jammer mainly consists of a two-dimensional turntable,
antenna system, servo control system, portable power supply,
tripod, upper computer software, etc. Its transmission frequency
band almost covers the current UAV communication frequency band on
the market, and can effectively jam targets within the range of the
antenna. At the same time, the jammer adopts a high-precision servo
transmission and control system, which can automatically track and
jam when connected to the UAV surveillance radar network.
Product Features:
1, Tracking multiple targets at the same time, real-time detection
of target speed, trajectory and spatial position.
2, Integration of a variety of anti-strong clutter algorithm.
3, Active phased array antenna to achieve full airspace coverage.
4, The device is small in size, light in weight and all
solid-state, with high stability and reliability.
5, The outer shell of the turntable is made of high-strength
aluminum alloy, which is sturdy and beautiful.
6, The pitch transmission section uses a worm gear transmission
which is self-locking in the event of a power failure.
7, The internal industrial grade (military grade optional) embedded
intelligent control system can realize the stable control of the
turntable.
| Parameter Name | Parameter Value |
| Radar System | 2D Active Phased Array |
| Operating Frequency Band | X Band |
| Scanning Range | Azimuth(Electrical Scanning):±15.5° |
| Pitch(Electrical Scanning):±30° |
| Azimuth(Mechanical Scanning):0°-360° |
| Pitch(Mechanical Scanning):0°-90° |
| Antenna Speed | ≤10rpm |
| Detection Range(Pd=0.8,Pfa=10-6) | ≥8 km (RCS=0.01m²) |
| ≥15.5km(RCS=0.1m²) |
| ≥25km(RCS=1m²) |
| Blind Range | 240m |
| Resolution | Range Resolution:15m |
| Azimuth Resolution≥5° |
| Pitch Resolution≥9° |
| Accuracy | Range Accuracy≥20m |
| Azimuth Accuracy≥0.8° |
| Pitch Accuracy≥0.8° |
| Target Radial Velocity | 0.8m/s-100m/s |
| Target Tracking Capability | ≥200 Batches |
| Transmit Power | 256W |
| Front-end Equipment Size | ≤686mm*411mm*145mm |
| Weight | ≤55kg |
| Parameter Name | Parameter Value |
| Counter Mode | Radio Interference Suppression |
| Counter Target | UAV Image Transmission, Flight Control Links, Navigation Signals |
| Counter Frequency Band | 20-6000MHz |
| 400MHz,800MHz,900MHz,1.2GHz,1.5GHz,2.4GHz,5.2GHz,5.8GHz(Optional) |
| Counter Type | Directional Antenna with PTZ |
| Counter Range | Horizontal 360 °, Pitch ± 60 ° |
| Counter Distance | 3-5km(Counter Range Varies by Model) |
| Counter Corresponding Time | 3s |
| Size | 50mm*450mm*750mm |
| Weight | ≤60kg |
| Power Consumption | Interference Switched On:970W |
| Ingress Protection | IP67 |
